UNDERSTANDING F STOP MANUAL
UNDERSTANDING F STOP ISO

Your camera will operate either with thirds- or halves of a stop, so when we look at different fractions of five (5-and-a half, 5-and-a-third and 5-and-two-thirds), we’ll get more f-stops you’ll probably recognise (f/6.7, f/6.3 and f/7.1, respectively).First things first, aperture does affect depth of field and in a normal shooting scenario aperture is your first consideration (if not only for most) when considering your depth of field. Of course, the f-stop scale doesn’t operate exclusively with whole numbers look at the second table to see what happens when I take a selection of fractions and plug them into the square root formula. The reason for choosing to use the ‘square root of two’ scale, then, is that it it keeps the intervals equivalent to the doubling and halving of exposures. So why did they choose this scale? Well, F-stops increase and decrease go up and down (inverse-) geometrically in powers of the square root of two because when the aperture diameter increases by the square root of two, the size of the area of the aperture (in other words: the amount of light that hits the film/CCD) is doubled. Which sounds pretty mystical, but have a look at the table that’s hovering to the right of this text the actual square roots on the left-hand side of the table might look arcane, but you’ll no doubt recognise the aperture f-stops as ones that your camera comes up with when you’re taking photos. The scale of F-stops is a geometric sequence of numbers: the sequence of the powers of the square root of 2. As such, the 50mm f/.95 isn’t a physics-defying freak of nature - it simply has an aperture opening that’s larger than its focal length 52.6 mm, to be exact. If you’re immediately wondering how this is possible, simply go back to the math: The 50mm f/1.0 lens has a 50mm aperture opening. You may have seen some very posh f/1.0 lenses (Canon’s version of the 50mm ƒ/1.0 costs around US$4,500, but you can pick up the ƒ/1.8 much cheaper there are Nikon, Sony, Olympus, and Fujifilm equivalents, too), and if you’ve been around in the photography world for long enough, you may even have come across a couple of 50mm f/.95. This fraction is obviously the reason why ƒ/4 is a larger aperture than ƒ/8 - if you get a 1/4 (25%) of a cake, you’re getting more cake than if you’re getting 1/8 (12.5%) of a cake. Let’s do the math: 1/4th of 100mm is 25mm - or about an inch.

So, if you have a 100mm lens set to f/4, what you are really saying is that the aperture opening in the lens is 1/4th of 100mm. Specifically, an aperture opening is a fraction of the focal length of your lens. The aperture opening is measured in f-stops, which are, in fact, a fraction. For one thing, f/2.8 is a pretty weird number, but how can f/2.8 be a larger aperture opening than f/4? Look how dusty it is, though! Ugh.Īperture is the one that always trips up my students, because it appears as if the F-stop scale doesn’t make any sense. F-stops and apertureĪ lens, fully stopped down.

UNDERSTANDING F STOP ISO

At ISO 400, it multiplies everything by 4 - and so on. At ISO 200, it’ll take your light measurements and multiply them by 2 (because it used half the shutter speed in its exposure calculation). When you’re shooting at ISO 100, your camera will use the light capture data as-is. These days, it refers to the sensitivity of your light sensor (or rather, a multiplication factor done by your camera’s processing chips). ISO deals with light sensitivity in the old days, we’d talk about film speeds of a certain ISO. The same goes for 1/100 and 1/200 - the former is half as fast as the latter. As I hinted at before, they are both pretty intuitive: A 2 second shutter speed means that the shutter is open twice as long as a 1 second shutter speed. ISO and Shutter speedsīefore we dive into aperture-land, let’s take a look at shutter speeds. In other words: if you shoot a photo at 1/100 second, f/4 and ISO 200, you would get exactly the same brightness in your photo if you halved the ISO and doubled the shutter speed (so 1/50 second and ISO 100) or the other way around (1/200 second shutter speed and ISO 400). That is you can use two different sets of exposure settings, that let the same amount of light onto your light sensor.

UNDERSTANDING F STOP MANUAL

It’s sort of important to know what ‘half the aperture’ is of any given aperture, because if you’re shooting in Manual mode (you’re not still shooting in automatic modes, are you?!), you can use something called ‘synonymous exposures’.

Understanding f stop